Auto-Load is a setting that allows you to avoid loading your Project Wif each time you power on TempoTreadle. If the Status is set to On, TempoTreadle will always remember the last loaded WIF and automatically load that WIF upon powering on the system. If you do not intend to weave with that WIF, go to Project Setup and load the intended WIF.
If the status is Off, the WIFs will not be automatically loaded when the system is powered on.
By default, your TempoTreadle II system is set to Status On.
When this screen is checked, the currently loaded WIF name is shown (GEM12SB.WIF in the example above).